1.1.75 - Released August 3, 2012

ChangeLog

• Version 1.1.75.
• Version 1.1.75-pre14.
• bit files for the "final" pre
• Version 1.1.75-pre13.
• new bit file with different reset logic for video out
• Version 1.1.75-pre12.
• stardot: Move hardware reset during device initialization to fix video out.
• Revert to production version of NetCamSC 5MP H.264 firmware.
• Version 1.1.75-pre11.
• new test bit file
• new bit file
• Version 1.1.75-pre10.
• bit file to test fix for video out
• Version 1.1.75-pre9.
• NetCamSCX/NetCamSCDX: Change default resolution for 2.5MP devices.
• stardot: Revert FPGA load status register check in stardot_init().
• stardot: Fix FPGA load status register in stardot_init().
• Remove ITT build.
• Remove user/group changes from ITT build.
• Version 1.1.75-pre8.
• [Bug #1238] PTZ control sent via serial port is not buffered.
• awk: Add PROCINFO builtin array support.
• 2.5M bit files for 1.1.75
• 10MP bit files for 1.1.75
• last of the 5M for 1.1.75
• new bit file for dome
• Version 1.1.75-pre7.
• new SC5M bit file for 1.1.75
• stardot: Check FPGA load status register in stardot_init().
• xfpga: Fix firmware reload retry on stardot_init() failure.
• Hide various flash ROM programming information messages.
• Update copyright notices in stardot and xfpga drivers.
• Version 1.1.75-pre6.
• flatfsd: Use atomic erase/write when saving configuration data.
• h264: Add lost interrupt debugging logic for H.264
• flatfsd: Use syslog(3) instead of stderr for various messages.
• video-watchdog: Log hardware ID and output of /proc/video.
• Version 1.1.75-pre5.
• ITT build: Fix web configuration authorization for "admin" user.
• Version 1.1.75-pre4.
• Add "ITT" build for Thailand.
• admin.cgi: Avoid saving to flash ROM if configuration has not changed.
• Add support for Spansion S29GL032N 4MB flash ROM.